|
|
R.E.P. Air Services Ltd. |
|
|
"Compressed Air Technology for a World Under Pressure" |
||
|
|
||
|
|
||||||||
|
|
||||||||
|
|
|
|||||||
|
We use Bekomat condensate drains with ÖWAMAT water oil separators and Domnick Hunter air filters to keep your air system running clean. As with all the products we sell we can fully install and maintain all the products displayed on this page.
BEKOMAT
BEKOMAT® from BEKO has become the industrial standard because of its high reliability and particularly because it offers energy-saving operation without loss of compressed air. There are a number of very good technical reasons for this. Compared with float drains, BEKOMAT® has decisive advantages, especially since it:
BEKOMAT® also has decisive advantages over solenoid valves, especially since it:
ÖWAMAT
The regulations are clear.The Water Resources Act stipulates the regulations for the use of water resources. The discharge of compressor condensates is prohibited without suitable processing, waste water containing typically more than 20 mg/l mineral oil into the sewage system. The legislation demands water processing corresponding at the very least to the "generally accepted engineering standards". This means a reduction to max. 20 mg/l for hydrocarbon as a guide parameter for mineral oils. Regionally, these values may be significantly lower. "Disposal" is yesterdays technology!Disposal carried out by companies specialising in this field is safe but expensive. Disposal costs of condensate are considerable. In addition, costs for certified collection tanks, monitoring devices, and installation work, etc. are incurred. Processing of condensate where it accumulates!Much simpler and, most importantly, more economical is processing of condensate right there where it accumulates. The oil- water separators ÖWAMAT® have established themselves as the standard and offer "state-of-the-art, processing.
REP Air "Dri-Line" Filters
The new Dri-Line range of compressed air filters has been designed from the outset to meet current and forthcoming requirements for compressed air quality. Using aerospace technology, we have optimised the flow path through the housing and element, significantly reducing air turbulence and pressure losses. Providing an optimal flow path is key to reducing system operating costs. |
|
||||||
|
|
||||||||